Manual/electronic height adjustable benches

		The frame consists of 1.5mm thickness laser cut foot rails with 2mm thickness double uprights. The uprights are fully welded to a 2mm thickness laser cut beam housing. This method of construction offers an extremely rigid base frame, imperative to positive operation.
Click on an image below to display a larger version

The top frame also uses 2mm thickness double uprights that are fully welded to the top rail. Each gear used in the top rail section is capable of 800 N lifting force and offers step less and smooth action via either electric drive or manual crank.

The length rails are made from 1.5mm thickness tube with 2mm thickness used in the trapezoidal beam. This gives the product excellent lateral stability. To protect the drive rod, all frames are supplied with a 0.9mm drive rod cover.

The electrical operation is added to these frames and offers movement simply through a push button (up/down) with 4 memory pre-sets and double click function. There is also a digital display for height guidance only.

The benches are available in 2 options of height adjustment.
Low level bench, which is height adjustable between 465mm and 720mm
Standard bench, which is height adjustable between 640mm up to 940mm

Both options are available in widths from 800mm to 1800mm.